CCNA Training (Cisco Certified Network Associate)

Grab the opportunity to acquire CISCO Networking skills

ABOUT THE PROGRAM

The motive of the MSP training to design Cisco Certified Network Associate course is to impart technical knowledge to its candidates. The CCNA is just one level above to Cisco Certified Entry Networking Technician (CCENT). It is just one step below the CCNP (Cisco Certified Network Professional). MSP Training under the topic of Cisco training offers five Cisco Career Certification programmes and levels of accreditation. The five different certifications are mentioned below:

  • Beginning Level
  • Professional Level
  • Associate Level
  • Experienced Level
  • Architect Level

Cisco corresponded certification and training provide syllabus for developing business job roles in its latest update. Now, we have different types of CCNA training with the foremost being the "CCNA Routing and Switching". There are Other kinds of CCNA that focus on the following types of areas:

·        Security

 

·        Data centre technologies

 

·        Collaboration

 

·        Industrial plants

 

·        Cloud

 

·        Service providers

 

·        Operations

 

·        Wireless network.

 

·        Design

 

 

  • Enhance your capabilities to use your Cisco products at your maximum potential

  • Clear understanding of the Local Area Network as well as Wide Area Network

  • Get knowledge of routing and switching of network systems

  • After successful completion Delegate can expect high perks

  • MSP training arranges Certified trainers for its training

  • This course is an Ideal one for network professionals

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

Includes

Pre Course Material

It provides some basic knowledge about the course before training.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Certificate

Delegates will get certification of completion at the end of the course.

PREREQUISITES

The course is also developed for Novice and there is no mandatory condition to acquire this course. But if a candidate does possesses the knowledge of following topics then they must have an upper edge over the novices:

  • Basic Computer Literacy skills
  • Basic PC Operating System Navigation knowledge
  • Basic Internet Usage knowledge
  • Basic IP Address Knowledge

TARGET AUDIENCE

MSP training designed this course for all those professionals who want to be proficient at CCNA Routing as well as Switching. Furthermore, all those professionals interested in the installation, operation, and verification of LAN networks can opt this course.

WHAT WILL YOU LEARN?

  • Cisco certification demonstrates your Cisco proficiency
  • Delegate will learn about the maintenance of Complex Networks
  • Time management gets better as skilled professionals handle issues in certain time frame
  • Maintenance and checking of tools and applications
  • Make you that much proficient to get the most out of your IT share
  • Certified employees can expect a higher salary
  • Certified Cisco networking experts hold the knowledge to succeed among its peers
  • Cisco provides the right skills to ease into deployment
  • Maintaining and checking Routing-Based Solutions
  • Certified Cisco networking experts are vastly recognised and sought after this certification
  • Maintaining and Troubleshooting Network Security Solutions

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

The purpose of the MSP Training to design this course makes all the enrolled candidates get aware and proficient at CCNA Routing and Switching. All these features make this course a perfect certification programme. With this certification in hand, network professionals with entry-level certifications avail an opportunity to upgrade their skills and networking knowledge than that of earlier knowledge. The delegates surely feel confidence and have industry-ready knowledge after leaving the classroom of MSP training.

At the end of the course, CCNA course under the MSP Training provides the candidates' required skills:

  • Capability to install, arrange, operate, and check medium-size routed and switched networks
  • Configure and optimize network systems
  • Focus on infrastructure pertains to network systems

This course CCNA Training Following  topic as:

 


PROGRAM CONTENT

  • Introduction
    • AAA configuration
    • Building VoIP security
    • IOS firewalls
    • The quintessence behind cryptography
    • Digital signatures
    • Configuring Cisco routers using IOS Software security topographies
    • Configuring network expedients to restrict access from anywhere
    • Maintaining the integrity of network traffic
    • Locking down the Cisco Router
    • PKI and asymmetric encryption
    • Building IPsec VPNs
    • Closing down the Cisco Switch
    • Configuring Intrusion Protection on Cisco devices
    • Setting site-to-site VPNs
    • Firewall features on Cisco devices
    • Constructing a cohesive security policy
    • VRFs
  • Solutions for Network Security Maintenance and Troubleshooting
    • Security Troubleshooting
    • Features of Security Troubleshooting
    • Security Features Review
  • Maintaining and Troubleshooting Integrated
    • Troubleshooting Complex Environments
  • Maintenance and Troubleshooting Tools and Applications
    • Assembling a Basic Diagnostic Toolkit Using Cisco IOS Software
    • Using Specialized Maintenance and Troubleshooting Tools
  • Maintaining and Troubleshooting
    • Troubleshooting VLANs
    • Troubleshooting Spanning Tree
    • Troubleshooting Switched Virtual Interfaces and Inter-VLAN Routing
    • Troubleshooting FHRPs
    • Troubleshooting Performance Problems on Switches
  • Development Maintenance for Complex Networks
    • Network Maintenance Tools, Applications, and Resources
    • Standard Maintenance Processes and Procedures
    • Applying Maintenance Methodologies
  • Planning Troubleshooting Processes
    • Using Troubleshooting Methodologies
    • Planning and Implementing Troubleshooting Procedures
    • Integrating Troubleshooting into the Network Maintenance Process
  • Maintaining and Troubleshooting Routing-Based Solutions
    • Troubleshooting Route Redistribution
    • Troubleshooting Network Layer Connectivity
    • Troubleshooting EIGRP
    • Troubleshooting OSPF
    • Troubleshooting Performance Harms on Routers
    • Troubleshooting BGP
  • Network Essentials
    • Resolve or escalate
    • Verify & monitor resolution
    • Apply troubleshooting procedures to resolve problems
    • Perform and document fault isolation
    • Configure, verify & troubleshoot IPv4 addressing & subnetting
    • Compare & contrast TCP & UDP protocols
    • Impact of infrastructure components in a network
    • Firewalls, Access Points, Wireless controllers
    • Compare & contrast OSI & TCP/IP models
    • Compare & contrast network topologies
    • Star, Mesh, Hybrid
    • Select the appropriate cabling type (Straight & Cross)
    • How cloud resources affect the network architecture
    • Basic virtual network infrastructure
    • Differentiate between collapsed core and three-tier architecture
  • LAN Switching Technologies
    • Trunk ports, Add & remove VLANs on a trunk
    • MAC learning & ageing, Frame switching, Frame flooding, MAC address table
    • PortFast, BPDU guard
    • DTP, VTP (v1&v2), and 802.1Q Native VLAN
    • Configure & verify Layer 2 protocols
    • Configure, test, & troubleshoot (Layer 2/Layer 3) EtherChannel
    • Static, PAGP, LACP
    • Configure, verify, and troubleshoot inter-switch connectivity
    • Configure, test & troubleshoot STP related optional features
    • STP mode (PVST+ and RPVST+), STP root bridge selection
    • Define the benefits of switch stacking & chassis aggregation
    • Interpret Ethernet frame format
    • Cisco Discovery Protocol, LLDP
    • Troubleshoot interface & cable issues (collisions, errors, duplex, speed)
    • Configure, verify, and troubleshoot VLANs (standard/extended range) spanning multiple switches
    • Access ports (data & voice), Default VLAN
    • Describe & check switching concepts
    • Configure, verify, & troubleshoot STP protocols

 

CCNA Training (Cisco Certified Network Associate) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Gloucester

Gloucester is the non-metropolitan county of Gloucestershire with a population of around 121,900 according to 2011 census. It is a 53rd populous city in the United Kingdom. It is situated near the Welsh border on the eastern bank of the Severn River. Gloucester is a city in the southwest England and lies between the Forest of Dean and the Cotswolds rural area. Roman Emperor Nerva founded the city in AD 97. The first charter was granted to the city in 1155, gave the inhabitants the same rights as the civilians of London and the second charter gave the freedom of passage on the Severn River. The town’s economy is largely based on the service industry. The city is said to have been dominated by the aerospace industry in its earlier times.

History

The early settlement of the city found its root back to the Roman period. Romans built the Glevum, a Roman fort that became a colonia of retired legionaries. The number of remains, parts of the walls and coins have been discovered, and other Roman artefacts and tombstones are stored in the Gloucester City Museum. During the 4th century, Celtic Dubonni tribe had taken control of the city after the withdrawal of the Roman Empire. Until 584, the city became a part of Wessex in the Anglo-Saxon Chronicle. The city derived its name from the Anglo-Saxon fort.       

In 577, the Saxons occupied the city. Its geographical location and the foundation of St Peter abbey contributed towards the growth of the town. The city was a borough with a castle before the Norman invasion of England. The remains of Northumbria King, Saint Oswald, brought to the small church at the beginning of the 10th century, attracted many pilgrims to the town. Recently, a unique coin was discovered in the north of the city dates back to 1077-80. The city had a large fishing industry in the medieval period. The main export was wool, leather, weapons and tools at that time. During the 14th century, the most significant period began in the history of the town with the convention of Parliament in Gloucester. The two grammar schools were built in the city in the 16th and 17th century: Sir Thomas Rich’s School and the Crypt School.

Transport

M5 motorway serves the Gloucester and runs to the east of the city. The north, central and south city is also served by Junction 11, Junction 11 a and Junction 12 respectively. The A38 connects the town with the cities of Bristol and Tewkesbury (civil parish in Gloucestershire) and runs to the north-south of the city, while A40, A46, A417 links Gloucester with the towns of Cheltenham, Monmouth and Cirencester. The city was the lowest bridging point on the river before the construction of Severn Bridge in 1966. The central railway station serves the city of Gloucester in England and connects to the cities of Reading, Nottingham, London, Cardiff and Birmingham.

Industry

Historically, the city was dominated by the aerospace business. The Gloucestershire Aircraft Company renamed as Gloster Aircraft Company in 1926 as international customers found difficult to pronounce ‘Gloucestershire’. The aviation history is celebrated by the sculpture in the city centre. The city is home to the large insurance company Ecclesiastical Insurance and Allchurches Trust, a large national charity in the United Kingdom. The TSB Bank and Lloyds Banking Group have their offices located in the city. A Business Park is located on the periphery of the city and has close links to the A417 and M5. The big brands including Detica, Direct Wines, Ageas and Fortis have their presence in the business park. The industrial history of the city is celebrated at the National Waterways Museum with interactive displays and canal boats.

Attractions

The famous places to visit in the city include Gloucester Cathedral, The Museum of Gloucester, National Waterways Museum, Gloucester Quays and Docks, Gloucestershire Arts and Crafts Centre, Jet Age Museum, Prinknash Abbey, The Barn Owl Centre and much more exciting locations.