CCNA Security Training

Manage Your Cisco Network security 

ABOUT THE PROGRAM

The motive of the MSP Training to design this course under the supervision Cisco training is to produce candidates to worlds’ best level. The Cisco Certified Network Associate (CCNA) Security Training confers the skills of securing the Cisco networks. It also makes sure that the delegates get to learn all essential skills that are required to manage setup security, recognise and lessen risks to their networks. The CCNA Security course also familiarise the candidates with all the vital set of tools to make the network secure and safe. The factors include are installation, checking and monitoring network devices. In addition to this, the Security Training course further makes known into specifying how users can maintain data and device reliability, privacy, and accessibility with mastering in the technology that Cisco uses in its security structure.

  • With the Use of Cisco Technology and tool, safeguard your network devices

  • Appreciate VPN and the Firewall Technologies

  • How to recognise and defend the network from the intruders

  • Learn Advanced network security layouts

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

PREREQUISITES

Either of the Following qualifications is mandatory to sit for this course

  • CCENT (Cisco Certified Entry Network Technician) Certification
  • Interconnecting Cisco Networking Devices Part 1 v3.0

This training is a combination of Interconnecting Cisco Networking Devices ICND1 and administering Cisco IOS Networking Security. If the delegate already has ICND1 or the CCENT certification, they can directly skip that module and continue with the required course executing Cisco IOS Networking Security.

TARGET AUDIENCE

MSP Training designed this course for Support and Help Desk professionals, Network Security Specialists and Administrators

WHAT WILL YOU LEARN?

Once delegate complete this course, he would have learnt the following concepts

  • Typical network security concepts
  • Secure routing and switching infrastructure
  • Deploy basic authentication, authorisation, and accounting services
  • Deploy basic firewalling services
  • Administer necessary site-to-site and remote access VPN services
  • Advanced security services such as intrusion protection, content security and identity management
  • Design an all-inclusive network security policy to reduce threats against information security
  • Set-up routers with Cisco IOS software security features for administration as well as reporting functions
  • Bootstrap the Cisco ASA Firewall for use in a production network
  • Arrange the Cisco ASA Firewall for remote access to a Secure Sockets Layer (SSL) VPN
  • Design a Cisco IOS zone-based firewall (ZBF) that accomplishes simple security procedures on a network
  • Arrange site-to-site VPNs using Cisco IOS features
  • Arrange security features on IOS switches to mitigate various Layer 2 and Layer 3 attacks
  • How a network can be compromised using freely available tools
  • Administer passwords and security features
  • Observe the AAA concepts of authentication, authorisation, and accounting by making use of the local database and the Cisco Secure ACS 5.2 as well.
  • Arrange packet filtering on the perimeter router

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

There is a mandatory condition for this course. The delegates can initiate their training by certifying for the ICND1 version 3.0 course which considers being the foundation stone for enrolling into the CCNA Security Training. The ICND1 course delivers the basics to the delegates during which they go through concepts such as manage, install, operate, and verify an essential IPv4 and IPv6 network. The MSP Training course also includes recognising basic security attacks, managing a LAN switch and an IP router, and configuring network devices. The CCENT (Cisco Certified Entry Network Technician) course is an alternative of the ICND1. Same as the ICND1 course, the CCENT course objective is to provide the essential skills which are helpful in installation, configuration, and operation a small-to-medium-sized network. The CCENT is the foundation on which the CCNA Security Training in routing and switching, network design, network security and wireless networking is built.


PROGRAM CONTENT

    • Discuss the security hazards faced by modern network infrastructures
      • Describe and list methods for reducing regular network attacks that include Worms, Virus, and Trojan Horses
      • Describe the Secure Cisco routers with the Cisco Self Defending Network architecture
    • Safeguard Cisco routers using the SDM Security Audit feature
      • Secure a Cisco router with the help of the One-Step Lockdown feature in SDM·
      • Secure administrative access to Cisco routers
        • by using encryption techniques, exec-timeout, login failure rate and enhanced IOS login features
        • by defining different privileges for different roles
        • by configuring role-based CLI
    • Manage AAA & external ACS
      • Understand AAA, its functions and significance
      • Study the characteristics of TACACS+ and RADIUS AAA protocols
      • Manage AAA genuineness, authorisation and accounting
    • Reduce threats to Cisco routers and networks using Access Control Lists
      • Discuss the working of standard, extended, and named IP ACLs that routers use while filtering packets
      • Configure and verify IP ACLs to reduce given threats in a network using Command Line Interface (CLI)
      • From the CLI setup IP ACLs to prevent IP address deceiving
      • Discuss the cautions to be deliberated upon when forming ACLs
    • Manage reporting and network management
      • Using of CLI and SDM to manage SSH on Cisco routers
      • Use CLI and SDM to manage Cisco routers to send Syslog messages to its server CCNA
    • Reduce Layer Two Assaults
      • Tell the ways to avert layer two attacks by designing elementary Catalyst switch security features
    • Administer the Cisco IOS firewall feature set using SDM
      • Describe the pros and cons of the various firewall technologies ·
      • Explain stateful firewall operations and the function of the state table
      • Implement Zone-Based Firewall using SDM
    • Manage Features of Cisco IPS, IOS with the use of SDM
      • Detect and Prevent host based and network based intrusion
      • Attack responses, IPS technologies and monitoring options
      • Troubleshoot Cisco IOS IPS operations with the use of SDM
    • Administer site-to-site VPNs on Cisco Routers using SDM
      • Discuss all methods used for encryption purposes
      • Learn IKE protocol functionality
      • PF(protocol functionality) phases
      • Describe IPSec
      • Its available security functions
      • Arrange and verify an IPSec site-to-site VPN with pre-shared key authentication using SDM

                                          

CCNA Security Training Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Darlington

Darlington is a large and historic market town and county in North East England with a population of around 92,363 according to 2011 census. It is located on the Skerne River, known as the tributary of the Tees River. The town lies on the south Durham which is close to the Tees River, also serves as a border between the Yorkshire and Durham. The two main rivers pass through the town: Skerne River and Tees River. The neighbouring towns surround the town are Stockton, Newton Aycliffe and Bishop Auckland.

The local historical Christian group and Religious Society of Friends Quaker families played the crucial role in the development of the town in the Georgian and Victorian period. The World’s first steam locomotive passenger railway ‘Stockton and Darlington Railway’ was introduced by Quaker. The town is also known as Darlo. The town is surrounded by several suburbs include Harrowgate Village, Firthmoor and Skerne Park, Faverdale and the West Park. The twin towns of the Darlington are Amiens in France and Mulheim an der Ruhr in Germany. 

History

The early settlement of the town traced its root back to the Anglo-Saxon period. It has been suggested that the town derived its name from the Saxon Dearthington meaning the settlement of the people of the Deornoth. The name of the town replaced by new name Derlinton during the Norman era. It is also known as Darnton in 17th and 18th century. The most important English church ‘St Cuthbert Church’ is built in the city in 1183 and listed as Grade I building, while the oldest church St Andrew was established in 1125 around the Haughton area of Darlington.

Darlington continued to grow as a small market town by the early 19th century. The Backhouse and Pease families, the strong Quaker families were significant employers of the town. The industrialist Joseph Pease constructed the clock tower, the famous landmark of the town in 1864. The face of the clock and tower bells were produced by T. Cooke and Sons and John Warner and Sons respectively. The tower bells of the clock tower are considered as sister bells placed inside the Elizabeth Tower at the Houses of Parliament, also known as Big Ben in London.

The town is also recognised for its corporation with the modern railway and this event is celebrated at Railway Centre and Museum of the Darlington. The town became the significant centre for manufacturing of railways in the 18th century. In 1825, Locomotion No 1 engine of George Stephenson was designed for passengers and goods and travelled between Stockton-On-Tees and Shildon via Darlington. The Hopetown Carriage Works was established in the town for supplying locomotives to the Darlington Railway. The three major works were developed in the town including Darlington Works, Faverdale Wagon Works and Robert Stephenson & Company.

The bridge building and engineering also played a significant role in the growth of the town. The headquarter of the large engineering firm Cleveland Bridge and Engineering Company is also located in the town and built Sydney Harbour Bridge, Tyne Bridge and the Humber Bridge.  The town is home to the leading engine building firms and industrial headquarters of AMEC.

Economy

The town is home to the largest private sector employer EE (Everything Everywhere) British mobile network operator and provided job to more than 2500 people. Other major employer of the town are Student Loans Company hired more than 100 people. Large engineering firms are based in the town such as Cleveland Bridge, Cummins, AMEC and Argos. Many modern and developing industries are also growing in the town including information technology. Recently, the town is also ranked one of the economically important places in England by BT Group and to accomplish superfast broadband rollout project, BT group have installed underground fibre-optic cables.