Lean Six Sigma Green Belt

Using DMAIC to remove waste processes

ABOUT THE PROGRAM

All organisations at every point of the time aim to earn profit which is essential for all businesses to survive. The organisations used to count on the experience of the professionals who handled the projects of these organisations. Since the last few years, this way has been given up and new techniques such as the Lean Six Sigma, TOGAF and Six Sigma are being adopted. Lean Six Sigma is an amalgamation of two methodologies - Lean and Six Sigma. Lean Six Sigma has since its induction helped reduce waste and increase the productivity of the organisation.

This training– the Lean Six Sigma Green Belt – is the second course within the horizons of the Lean Six Sigma training. Any candidate who wishes to opt for the Green Belt training course and has already covered the fundamentals in the Yellow Belt course stands to gain more than those who are altogether new to Lean Six Sigma. A professional who possesses a Green Belt certification is capable of leading the Yellow Belts and in turn being guided by the Black Belt professionals. A delegate who starts directly with the Green Belt course is first required to cover the Yellow Belt syllabus and thereafter the Green Belt concepts.

We at MSP Training make sure that on the completion of the Green Belt course, delegates are able to handle their projects in the organisation independently and without any difficulty.

 

  • Understand the DMAIC approach of Lean Six Sigma to eliminate waste processes

  • Take a step towards Lean Six Sigma Black Belt certification

  • Learn Lean Six Sigma from certified professionals

  • Get trained from one of the best training providers

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Exam(s) included

Exams are provided, as part of the course. Obtaining certification is dependant on passing these exams

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Certificate

Delegates will get certification of completion at the end of the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

PREREQUISITES

Though not mandatory, a candidate appearing for the Lean Six Sigma Green Belt course must have a Yellow Belt Certification in hand. This is just for the good of the candidate as the Green Belt concepts can be better understood with the Yellow Belt concepts already clear in mind. A candidate who has no knowledge of the Lean Six Sigma concepts can also study the course but the course would then begin from the alpha of Lean Six Sigma concepts.

TARGET AUDIENCE

Any organisation or business that wants its profits to rise using a streamlining technology such as Lean Six Sigma can make its employees attend the course. Corporate batches can take up this course as can individual professionals who are in the need All organisation that is keen to implement Lean Six Sigma and to upgrade themselves to the Lean technologies. The following is the list of professionals who fall within the perimeter of this course:

  • Professionals holding a Lean Six Sigma Yellow Belt certification
  • People who wish to update themselves with the Lean Six Sigma Principles
  • Employers or employees who are interested in improving the profitability of their organisation
  • Quality System Managers
  • Quality Engineers
  • Quality Supervisors
  • Quality Analysts, and Managers
  • HR managers
  • Operations Managers
  • Supervisors
  • Management Consultants
  • Finance and Commercial Managers

WHAT WILL YOU LEARN?

  • Implement the various concepts of Lean Six Sigma
  • Use the DMAIC methodology to profit in an organisation
  • Save both cost and time with Lean Six Sigma
  • Eliminate waste processes
  • Increase the satisfaction level of both the employees and the customers
  • Using Lean Six Sigma statistical tools find out solutions to business problems

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

By going through the Lean Six Sigma Green Belt training the professionals are able to easily streamline the processes at their organisation. They gain productivity as a result of removing the unwanted processes which may have been taking extra time and resources. Delegates can complete their Green Belt certification in one of the two ways specified below:

Earn the Yellow Belt Certification and then enrol for the Lean Six Sigma Green Belt Certification

Enroll for the Green Belt Certification where the training will start with the Yellow Belt concepts and conclude only after teaching all the concepts of the Green Belt training.

The Green Belt methodology uses the DMAIC (an acronym for Define, Measure, Analyse, Improve and Control) to improve upon the current processes that are currently being used in the production line. The figure below shows the five stages of the DMAIC methodology.

 


PROGRAM CONTENT

  • Six Sigma and Organisational Goals
    • An Introduction
    • Six Sigma and Organisational Goals
    • Lean Principles
    • Design for Six Sigma Methodologies
  • Define Phase
    • An Introduction
    • Project Identification
    • Voice of Customer
    • Basics of Project Management
    • Management and Planning Tools
    • Business Results for Projects
    • Team Dynamics and Performance
  • Measure Phase
    • Introduction to Measure Phase
    • Process Analysis and Documentation (Create)
    • Probability and Statistics
    • Collecting and Summarizing Data
    • Statistical Distributions
    • Measurement System Analysis
    • Process and Performance Capability
  • Analyse Phase
    • Introducing the Analyse Phase
    • Hypothesis Testing
    • Exploratory Data Analysis
  • Improve Phase
    • Introduction to the Improve Phase
    • Design of Experiments
    • Root Cause Analysis
    • Lean Tools
    • Selecting a Solution
  • Control Phase
    • Introducing the Control Phase
    • Statistical Process Control
    • Control Plan
    • Lean Tools for Process Control
  • Tips and Tricks
    • Exam Tips
    • ASQ Exams
    • IASSC Exam

Lean Six Sigma Green Belt Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Wolverhampton

Wolverhampton is a metropolitan borough and second largest part of the West Midlands with a population of around 249,470 according to 2011 census. The city was founded in 985, and the name of the city is derived from Wulfrun in the Anglo-Saxon period. Earlier, the city was developed as a market town particularly in the woollen trade. During the industrial era, it became a principal centre for steel production, cars and motorcycles manufacturing and coal mining. The city’s economy is based on the service sector as well as the engineering industry.

History

In 910, the city served as a battle site between the unified West Saxons and Mercian Angles against the raiding Danes. Initially, the city grew as a market town in 1179, but at that time the city did not own a royal charter for conducting a market and the matter brought to the attention of King John in 1204. The charter was eventually granted for holding a weekly market on a Wednesday by Henry III in 1258. The city was considered as one of the staple towns of the woollen trade in 14th and 15th century. The Wolverhampton Grammar School was founded in 1512 and known as one of the oldest active schools in the United Kingdom.

A large number of metal industries started their operations in the city from the 16th century onwards, including the iron and brass working and lock and key making. The city was affected by two great fires in 1590, and 1696 resulted in the destruction of 60 homes and left nearly 700 people homeless. The first fire engine was purchased at the beginning of 18th century after the second fire. The presence of extensive coal and iron deposits in the area contributed towards the wealth of the city in the Victorian era and huge amount of industries established in the city.

In 1837, the railways arrived the city and the first station was situated at Wednesfield Heath, also designated as a First Class station. The station was destroyed in 1965 and replaced by the centrally located station on Stour valley line. Wolverhampton railway works were settled in the city in 1849 and became Great Western Railway’s northern division workshop in 1854. During the Great Famine period of disease and mass starvation, a large number of immigrants from Wales and Ireland moved to the city in the 19th century. The city was represented politically by the longest serving MP in parliamentary history, Charles Pelham Villiers.

The city saw a large expansion in bicycle industry from 1868 to 1975 with the establishment of more than 200 bicycle manufacturing companies included Marston, Star and Viking. The large volume of bicycles manufacturers left the city between 1960 and 1970. The public housing development project started in the city after the end of the Great War provided 550 new council houses by 1923. The first large-scale housing development took place in the northeast part of the city, Low Hill estate had more than 2000 new council houses and became one of the largest housing estates in the United Kingdom at that time. Huge Asian immigrants were settled in the city during the period (1940-1960), and Sikh community from the Indian state of Punjab contribute approximately 9.1% of the city’s population.

Economy

The economy of the city was initially based on automobiles, manufacturing and engineering industries. These traditional industries have closed over the years. Presently, the city is largely based on the service industry including the sectors of education, hotels, public administration and health, provide 74% employment to the workforce of the city. Another major employer of the city provided job to 12000 employees is Wolverhampton City Council. The city is home to Birmingham Midshires, University of Wolverhampton, Marston’s and Carillion.

Lean Six Sigma

What is Le...