CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Bromley

Bromley is located at a distance of around 15 km (9.3) miles in south east of Charing Cross. It is a one of the major district of south-east London England. Bromley was referred as Bromelag in early AD862. According to 2001 Census, the population of Bromley was 309,392. According to area, Bromley is the largest borough in London.

History

See of Rochester has a close connection with the history of Bromley. To create the Manor of Bromley in AD 862 the land was provided by King of Kent named Ethelbert. Until 1845 this land was owned by the Bishops of Rochester.  Later Coles Child, purchased Bromley Palace and he was a wealthy local merchant and philanthropist. Bromley formed an ancient parish in the Sutton-at-Hone lathe of Kent and the Bromley and Beckenham hundred. The Local Government Act 1858 was adopted by parish and a local board was formed in 1867. From 1924, Bromley became part of the London Traffic area. From 1933, Bromley formed a part of London Passenger Transport Area. In 1965, Bromley became a part of the recently created Greater London. After the First World War, Bromley town development was sufficiently complete. Large number of houses, industrial buildings and modern houses were replaced. In last 20 years, large area of town centre has been reconstructed to include large glades shopping centre. This resulted in loss of town centre housing area. Bromley High School was established on 18th January 1883. It is the 13th school of GDST (Girls Public Day School Trust). The opening of this school marked the significance of higher education for the girls. This school provided high levels of Scholarship and lay more emphasis in language. Headmistress of this school , Miss Heppel was expert in French.

 Culture

Bromley has many theatres. The Bromley Little Theatre close to Bromley North railway station and the Churchill Theatre in the town centre are well known among them. Bromley has a central library with a large book stock, reference library, Internet and Wi-Fi access. A four-screen site in Bromley is owned by Empire Cinemas. Morris dancer’s team is owned by Bromley.

Geography

In the BR postcode area, Bromley is a post town. BR1 covers areas like Sundridge Park, Bromley, Bickley and a part of Downham. The BR2 covers Shortlands, Hayes and Bickley and Bromley Common.

Economy

In the London Plan, Bromley is known as one of the major metropolitan centres. The town is having a large retail area which includes The Glades centre, a pedestrianised High Street and the main shopping mall. The retailers included by shopping area are Russell & Bromley, Gap and Oasis.

Governance

Bob Neil is the current MP of Bromley. The town is located in the Bexley and Bromley constituency and James Cleverly is London Assembly member of the same constituency. Harold Macmillan is Bromley's most famous MP.

Transport

Railway

Bromley mainly has two railway stations:

Bromley North station provide services to Charing Cross and London Bridge by changing at Grove Park. Bromley South station via Herne Hill, Kentish Town via Blackfriars, provide services to London Victoria. Trains are available to many stations including Gillingham, Orpington, Sevenoaks via Swanley, and Ashford International via Maidstone East.

Buses

Many means of transport for London services serve Bromley. These services connect Bromley with areas including Beckenham, Orpington, Crystal Palace, Bexleyheath, Catford, Chislehurst, Grove Park, Croydon, Eltham, Hayes, Lewisham, New Addington, Sidcup, Penge, and West Wickham.

Landmarks

On 16 April 1941, due to enemy action, the parish church of St Peter and St Paul was damaged. St Paul church is now located on Church Road. In Bromley, the most significant historic building is Bromley College located on London Road. Martin's Hill, Church House Gardens, College Green, Queen’s Garden and Library Gardens are the central public open spaces. Another well-known parish church is St Mark's which is standing on Westmoreland Road.