CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Doncaster

Doncaster is a place where markets were organised in the past. It was not mandatory at all for the smooth conduct of the market, but it has potential to hold a fair was also termed as Market town. The geographical location is near to South Yorkshire territory of the United Kingdom. With the geographical area of nearby suburbs and settlements, it forms a Metropolitan Borough of Doncaster. As per the population census of mid-2016, the population was 306,450. The only territory of the Doncaster contributes 109,810 population. As per the Treaty of Durham,  its Jurisdiction comes from the Scotland. The urban vicinity of the region contributes 158,145 people including the nearby villages.

Politics

There are three seats for the member of parliament in the Doncaster constituency. The constituency is currently under the power of Caroline Flint(Don Valley), Ed Miliband(Doncaster North), and Rosie Winterton(Doncaster Central). At a European level,  The city was a part of European Parliament Constituency. In September 2014, UklP organised yearly conclave. In the European Union Referendum 2016, Doncaster was in favour of leaving the European Union.

Geography     

With the development of the Coal Mining sector, the population of the borough expanded at a very rapid pace. In the late of 1970 and the beginning of 1980, it faced a lot of problem in the economic sector of the town. There have been lost in the job opportunities of the city. There has been a drastic shift towards the service industry of the city. The city has an excellent link with the rest of the United Kingdom owing to the communication links of it. There has been a destination where tourists come from all over the world, i.e. Frenchgate Shopping Centre.

Climate

Doncaster has a coastal climatic condition, and it lacks in the extreme temperature conditions. There has not been much difference between the maximum temperature as well as the lower temperature. RAF Finningley is the official weather station for the town.

Economy        

From the 18th century to 20th century, Doncaster was the major industrial centre among the nearby cities. It attracted visitors from all over the world, and it became extremely busy and experienced migration in the past. In nowadays, the city experiences development in commercial and residential wise.  

Tractor production      

During the 1930’s, International Harvester initiated the production of agricultural tools and implements at their manufacturing units. Farmall M was the first tractor manufactured in the unit on 13th September 1949. The initial parts for the manufacturing of tractors came from the United States of America

Transport

Doncaster is situated at the beginning of the European Route E13. Other main cities that are connected with it are London, Nottingham, and Sheffield. The unusual thing is that there is not a single European route designator in the street of the United Kingdom. The Initial Point of M1 motorway is M18 Junction 2 of Doncaster

Culture, tourism, and Nightlife

Doncaster Museum and Art Gallery are only renowned museums opened in 1964. It has been the home of local history, natural history, archaeology and decorative art. A lot of visitors visit the city during the weekend.

The nightlife of the city is appreciated nearby region. This town has 43 bars and clubs. It is just 200 to 300 meters distance from each other

Sports  

The City provides a lot of opportunities in sports and games. The City is famous for many games such as horse races, rugby football, soccer game and Speedway Racing. The basketball game is also played by few clubs though followed much by the native people. The city also has twin town in different countries such as Avion, France and Herten, Germany