CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Cardiff

Cardiff is the capital city of the Wales and county town of the historic South Glamorgan with a population of around 346,100 according to 2011 census.  The city is also known as the chief commercial city of the United Kingdom. The city is recognised as the most attractive tourist destination in the country and recorded 18.3 million visitors in 2010. The strategic location and geographical features played a crucial role in the developing the city as the largest coal port in the world. The city serves as a major base for most national sports and cultural institutions and forms part of the Eurocities network of the largest European cities. The Welsh office was built in the city in 1964, and it became an only centre of national administration. Until the 19th century, the city was the small town of the Wales, but with the arrival of industries and presence of major port for coal, transportation contributed towards the growth of the city. Some historians suggested that the city derived its name from earlier Welsh form Caerdyf meaning ‘the fort of the Taff’. Some previous studies also revealed that the name of the city is given in honour of nearby province governor during the construction of Roman fort. Later on, these have been rejected by modern scholars on linguistic grounds.

History

The early history of the city traced its root back to the Iron Age. The city formed part of Celtic British tribe during the Roman Conquest of Britain. In 75 AD, Romans built the fort at the opening of the River Taff, formed the northwestern boundary of the Cardiff. The fort also served as Isca Augusta (acted as border defences) military outposts for a long period. With the arrival of the civilian settlement, the fort has been demolished, and the Roman villa was discovered at Ely. A stone fortress was built similarly with the Saxon Shore Forts to safeguard the Britannia from raiders. Coins were found from the reign of Gratian depicted that the fort was demolished at the end of 4th century and last legions of Roman left the province of Britannia with Magnum Maximus.

The construction of Cardiff Castle began within the walls of the old Roman Fort, and it was substantially changed during the Victorian period. The city became the county town and free borough in the 15th century. At the same time, the Royal Charters were granted to the city and became a head port for collection of customs duties. The creator of modern Cardiff John Crichton was born in 1793 and spent the whole life in building the Cardiff docks. The town faced rapid growth with the construction of the dock and became the main port for exports of coal from the valleys of Rhymney and Cynon. The city was chosen as the site of the University College South Wales and Monmouthshire and got the status of the premier town in South Wales in 1893. The Maindy Barracks were built in the city at the end of 18th century to accommodate military permanently. The city captured a Roman Catholic Cathedral and granted the city status at the beginning of 19th century.During the interwar period, Cardiff docks entered into the phase of continued decline and faced a significant slump in demand for Welsh coal. Llandaff Cathedral and Cardiff Blitz were destroyed during the Second World War ended the linkage between Bute family and the Cardiff city. 

Economy

Industries played a significant role in the growth of the Welsh economy. The primary factors contributed towards the transformation of a small town into a big city was the coal demand as it was used in the manufacturing of iron and steel. The city has the most important and busiest coal port in the world, also known as Tiger Bay. The city is home to various notable companies related to education, public administration, infrastructure, insurance and health sectors such as British Gas, ING Direct, HBOS, The AA and SWALEC Energy.