CCNP Training (Cisco Certified Network Professional)

Be proficient at switching and routing in networking

ABOUT THE PROGRAM

The Cisco Certified Network Professional (CCNP) training is designed for candidates who have one-year experience in the networking field. The job of  CCNP professionals is to plan, execute, confirm and repair both Wide Area Network and Local Area Network. In addition to this, they are also responsible to work with other network specialists to get the desired results. At MSP Training, we make sure the knowledge and skills that you learn from this platform provide you with a lasting foundation. It will not only benefit you today but also relevant in the physical as well as the virtualized networks in the succeeding years.

  • Get training from certified instructors

  • Key learning points and tutor support

  • Networking skills

  • Get salary hike with CCNP Professional status

WHAT'S INCLUDED ?

Find out what's included in the training programme.

Includes

Key Learning Points

Clear and concise objectives to guide delegates through the course.

Includes

Tutor Support

A dedicated tutor will be at your disposal throughout the training to guide you through any issues.

Includes

Courseware

Courseware will also be provided to the delegates so that they can revise the course after the training.

PREREQUISITES

The mandatory condition is to have one-year experience in the networking field. Such norms must be as needed by ICND1 and ICND2. Furthermore, those who want to possess some equivalent skill can also opt this course.

TARGET AUDIENCE

  • All the Web professionals
  • Web technical support staff
  • Helpdesk professionals
  • Those involved in implementation and verification of routing protocols in other networks.

.

WHAT WILL YOU LEARN?

 After successful completion of the course, the candidates will learn how to:

  • Plan layout and make a document.
  • Scrutinisation of routing protocols in enterprise network.
  • Recognise the terms, components, and metrics of EIGRP.
  • Recognise, Scrutinise, and match OSPF multiarea routing functions and benefits.
  • Execute and verify the redistribution solution in a multiprotocol network using Cisco IOS Software features.
  • Assess mutual web performance issues and recognise the tools that need to provide Layer 3 path control. Further, it can use Cisco IOS Software characteristic to command the path.
  • Execute and ensure a Layer 3 solution using BGP to fix an enterprise network to a service provider.

Enquire Program

Fill in the form below & we'd get back to you.

PROGRAM OVERVIEW

While developing CCNP training, the main focus of MSP training is to concentrate on all those aspects that help in the professional growth of a candidate. Once the candidate is proficient, he or she can get a job easily after successful completion of the course. These skills help him or her, even to gain promotions to higher levels. We also give due importance to close observation to the skills pertains to routing, switching and checking of the candidate. The process of day to day evaluation kept in records for future reference.


PROGRAM CONTENT

Routing

Network Principles

  • Recognise Cisco Express Forwarding terms
  • Describe general web challenges
  • Analyse IP Working
  • Describe TCP working
  • UDP operations
  • Identify suggested changes to the network

Layer 2 Technologies

  • Arrange and verify PPP
  • Explain Frame Relay

Level 3 Skills and Tools

  • Categorise, design, and approve IPv4 addressing and subnetting
  • Acknowledge IPv6 addressing and subnetting
  • Arrange and verify static routing
  • Configure and genuine default routing
  • Classify routing protocol categories
  • Explain administrative distance
  • Check passive interfaces
  • Arrange and Scrutinise VRF Lite
  • Arrange and validate filtering with any protocol
  • Arrange and Scrutinise redistribution between any routing protocols and routing sources
  • Arrange and validate manual and auto-summarization with any routing protocol
  • Arrange and validate policy-based routing
  • Distinction of suboptimal routing
  • Explain ROUTE maps
  • Configure and authenticate loop prevention mechanisms
  • Configure and verify RIPv2
  • Describe RIPng
  • Describe EIGRP packet types
  • Configure and verify EIGRP neighbour relationship and authentication
  • Configure and verify EIGRP stubs
  • Configure and verify EIGRP load balancing
  • Describe and optimize EIGRP metrics
  • Configure and verify EIGRP for IPv6
  • Describe OSPF packet types
  • Constitute and validate OSPF neighbour relationship and authentication
  • Configure and validate network types, area types, and router types
  • Configure and verify OSPF path preference
  • Configure and verify OSPF operations
  • Configure and verify OSPF for IPv6
  • Describe, configure, and verify BGP peer relationships and authentication
  • Configure and verify e-BGP (IPv4 and IPv6 address families)
  • Explain BGP attributes and best-path selection

VPN Technologies

  • Configure and verify GRE
  • Describe DMVPN (single hub)
  • Describe Easy Virtual Networking (EVN)

Security of Infrastructure

  • Describe IOS AAA using local database
  • Define device security using IOS AAA with TACACS+ and RADIUS
  • Configure and verify device access control
  • Configure and verify router security features

Infrastructure Services

  • Configure and verify device management
  • Configure and verify SNMP
  • Configure and verify logging
  • Configure and verify Network Time Protocol (NTP)
  • Configure and verify IPv4 and IPv6 DHCP
  • Setup and validate IPv4 Network Address Translation (NAT)
  • Describe IPv6 NAT
  • Describe SLA architecture
  • Configure and verify IP SLA
  • Configure and check tracking objects
  • Fine-tune and validate Cisco Net Flow

SWITCHING (300-115)

Layer 2 Technologies

  • Configure and test switch administration
  • Configure and verify Layer 2 protocols
  • Configure and verify VLANs
  • Configure and verify trunking
  • Configure and test Ether Channels
  • Configure and verify spanning tree
  • Configure and check other LAN switching technologies
  • Describe chassis virtualization and aggregation technologies

Set-up Security

  • Configure and validate switch security features
  • Define device security using Cisco IOS AAA with TACACS+ and RADIUS

Setup Services

Configure and verify first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

  • Use Cisco IOS troubleshooting tools
  • Apply troubleshooting methodologies

Layer 2 Technologies

  • Troubleshoot switch administration
  • Troubleshoot Layer 2 protocols
  • Troubleshoot VLANs
  • Troubleshoot trunking
  • Troubleshoot Ether Channels
  • Troubleshoot spanning tree
  • Troubleshoot other LAN switching technologies
  • Troubleshoot chassis virtualization and aggregation technologies

Level 3 Know-hows

  • Troubleshoot IPv4 addressing and subnetting
  • Troubleshoot IPv6 addressing and subnetting
  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF Lite
  • Troubleshoot filtering with any protocol
  • Fine-tune between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms
  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbour relationship and authentication
  • Troubleshoot loop-free path selection
  • Troubleshoot EIGPR operations
  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing
  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbour relationship and authentication
  • Fine-tune network types, area types, and router types
  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication
  • Troubleshoot e-BGP

 

CCNP Training (Cisco Certified Network Professional) Enquiry

 

Enquire Now


----- OR -------

Reach us at 0121 368 7851 or info@msptraining.com for more information.

ABOUT Stoke-on-Trent

Stoke on Trent is located in Staffordshire in the UK. It is also abbreviated as Stoke, and it is a unitary authority area. Area of Stoke on Trent is around 36 square miles. In 2011, this area had a population of 469,000. Stoke on Trent is known as polycentric which means it is formed by six towns federation in the year 1910.

Stoke on Trent got its name from Stoke-Upon-Trent where the majority of the railway station and government center is located. Other four towns are Longton, Fenton, Tunstail and Burstem. Major pottery industry of England is located in the Stoke on Trent. It is commonly known as the potteries. Earlier it was a center of the industrial conurbation, and now it is a center for distribution and service industries.

Education

Stoke on Trent has four major educational institutions located in the local area. This city has two higher education colleges namely Stoke-on-Trent college and City of Stoke-on-Trent Sixth Form college. Earlier the Sixth Form College was established in Fenton and now on the Leek Road. Sixth Form College provides best A-level teaching to near about 1800 students. This college is more abundant in the area and it offers adult education as well as apprenticeships. The main campus is located in Shelton and secondary in Burslem. Staffordshire University is situated in Stoke-On-Trent. The main campus in Shelton that is near the railway station of Stoke-on-Trent. It got its university status in 1992. Royal Stoke University Hospital is home to branches of Keele University School of Medicine. With the involvement of Stoke On Trent city council, in the year 1949 Keele University was founded as University College of North Staffordshire.

Stoke-On-Trent has around 15 secondary schools namely Haywood academy, Birches Head Academy, St Peter's Academy, St Thomas More Catholic Academy, St Joseph's College, Excel Academy, Discovery Academy etc.

In the year 2007 Stoke-on-Trent's high school system's restructure was proposed. During the year 2010 various secondary schools were closed or merged like Michell High and Edensor High was combined to form Discovery Academy, Berry Hill High and St Peter's CE High School was combined to build St Peter's Academy.

Economy

Stoke-On-Trent is a significant center for the ceramics industry. In 1980's and 1990's British Manufacturing sector was hit by decline. Various factories, collieries, potteries, and steelworks were closed. Due to this, the unemployment rate increased in the Stoke-On-Trent.

Wedgwood pottery firm and its subsidiary Royal Doulton are located in Barlaston. In Indonesian factory primary production takes place. In Stoke town, Portmeirion is located which owns the Royal Worcester and Spode brands. In Hanley, Emma Bridgewater ceramics firm is located. In Middlepoint, Burleigh Pottery is located. In Etruria, Wade Ceramics is located. In Burslem, Royal Stafford and Moorcroft are located. Left manufacturers of Bone China is Aynsley Chine in Longton. In Tunstail main factory of Churchill, China is located.

Around 9000 firms are located in the city. Some are founded by local businessman and chairman of Stoke City Peter Coates. John Caudwell started Phones4U Company which is a significant mobile phone retailer. In Stoke on Trent, Michelin tyre company complex is located that includes its training center, truck tyre re-treading facility, and commercial head office.

Large warehouses of Co-operative pharmacy is located in this city. Single largest major employer in a city is Stoke-On-Trent city council, and another one is Royal Stoke University Hospital which has over 7000 staff members.

According to the Competitive Alternatives 2004 report, Stoke-On-Trent is the best cost-effective place to set up new businesses. The major shopping center is Potteries shopping center located in Hanley. It has around 87 units which include brands like New Look, Monsoon, Gap, HMV, River Island, La Senza, Topshop, Marks, and Spencer etc. Quality Formations ranked Stoke-On-Trent second best city for starting any business due to various factors like offices, energy, public transport, property and financial access.